EC-1 Running Tool

The Model EC-1 Running Tool is used to run and set a variety of Flow Control tools such as Blanking Plugs, Check Valves, and Chokes.
Description

EC-1 Running Tool

Technical Data Sheet

Run many Baker-Style locks and plugs

 


Applications

 

  • Running Baker-style “S”, “W”, and “Z”, locks and plugs

Features

 

  • Versatile, simple design
  • Locating ring or thread protector operation
  • Box-down connection

The Model EC-1 Running Tool is used to run and set a variety of Flow Control tools such as Blanking Plugs, Check Valves, and Chokes.

Although it is a simple design, it is versatile in its ability to run different styles of Flow Control devices.  This is accomplished by the positioning of the shear pin holes.

The thread protector is used when running all positive locating tools. When Flow Control device is to be run selectively into a downhole profile, a Locating ring is used in place of the thread protector.

The EC-1 has a box connection down, allowing for the use of a shank in cases where necessary to set specific Flow Control devices.

 


Description

 

Dimensional Information


Tubing Size

2-3/8”

2-7/8”

3-1/2”

4 ½”

Fish Neck OD

1.375”

1.75”

2.313”

3.125

Tool Body OD

1.72”

2.19”

2.68”

3.56”

Top thread connection

15 /16 ”-10

1- 1 /16 ”-10

Bottom thread connection

¾”- 16

1”-14

Shear Pin diameter

3 /16

 

 

 

EC-1 Running Tool

 

 

 

 

 

Tags - eot, evolution oil tools, oil tools, oil & gas, flow control, running tool, C-1, EC-1 Running Tool