ERZG Blanking Plug

The ERZG Blanking Plug is a positive blank-off tool designed to be run into an ER Landing Nipple. It holds pressure from both above and below. Conventional wireline tools and techniques are used to run, set and pull the blanking plug.
Description

ERZG Blanking Plug TDS

ERZG Blanking Plug
Technical Data Sheet

Plugging ER Landing Nipples

 


Applications

 

  • Plugging ER Landing Nipples

Features

 

  • Reliable design




The Evolution ERZG Blanking Plug is a positive blank-off tool designed to be run into an ER Landing Nipple. It holds pressure from both above and below.  Conventional wireline tools and techniques are used to run, set and pull the blanking plug.

 

Operation

 

While running in the hole the mandrel is in the lower position, allowing fluid to bypass through the ports on the bottom sub.  When the plug is located and set into the nipple, the mandrel is moved to its upper position, there by blanking off the ports and providing a complete seal.  The mandrel is kept in position by the shear pins.

 

Running and Setting Procedure

 

1. Pin the plug to a EC-1 Running Tool and attach it to a normal wireline tool string.

2. Run into the hole until the no-go shoulder on the lock mandrel locates on no-go ID of the nipple.

3. Pull upstrain to verify that the dogs are locked in place.

4. Jar up to shear the lower shear pins on the running tool.  Continue upstrain until the mandrel has moved to its full up position.

5. Shear the upper shear pins on the running tool.  Pull the EC-1 out of the hole.

 

Equalization

 

It is imperative that the plug not be pulled until pressure on both sides of it is equalized. The procedure is as follows;

1. Run in with an ERB Pulling Tool and latch onto the fishing neck.

2. Jar up to shear the plug’s shear pins and remove the fishing neck and mandrel sub-assembly.

3. Allow sufficient time for the pressure to equalize through the equalization ports.

 

Pulling Procedure

1. Run in with an ERB Pulling Tool with an attached EB Probe.

2. As the pulling tool latches onto the lock mandrel fishing neck, the probe collapses the dogs.  Once the dogs are retracted, remove the plug from the nipple by upward jarring.

 

Specifications

ERZG Blanking Plug Specifications

ERZG Blanking Plug

 

 

ERZG Blanking Plug

 

 

Tags - ERZG, FWG, blanking plug, evolution oil tools, flow control, zone isolation, oil tools, well service tools, oil and gas, ER Landing Nipple

 

 

Fill out my online form.