Dimple-On Connector

Coil tubing connections simplified
Description

Features

 

  • Available in all coiled tubing sizes.
  • Full inner diameter bore preventing flow restrictions.
  • One piece design.
  • Dimples transmit torque from bottom hole assembly to the coiled tubing.
  • Elastomeric seals.
  • Standard or H2S service.
Technical Data Sheet Category Catalog

 

The Dimple-On Connector provides a means of connecting the coiled tubing to the bottom hole assembly. The connector is attached to the coiled tubing by dimpling the coiled tubing to the pre-milled dimples of the connector.  The connector also provides a means of sealing on the inside of the coiled tubing by the use of three elastomeric O-Rings.

 

 

Tubing Size

(in/mm)

Coiled Tubing OD

(in/mm)

Connection

 

Inner Dia.

(in/mm)

Tensile Yield

(Lbs)

1.563

(39.7)

1.250

(31.8)

1.00

(25.4)

AMMT

0.688

(17.5)

68,100

1.563

(39.7)

1.500

(38.1)

1.00

(25.4)

AMMT

0.688

(17.5)

68,100

2.00

(50.8)

1.750

(50.8)

1.50

(38.1)

AMMT

0.938

(23.8)

127,100

2.00

(50.8)

2.000

(50.8)

1.50

(38.1)

AMMT

1.000

(25.4)

127,100

2.375

(60.3)

2.375

(60.3)

1.500

(38.1)

AMMT

1.000

(25.4)

127,100

2.875

(73.0)

2.875

(73.0)

2.375

(60.3)

PAC

1.375

(34.9)

218,500



 

 

Dimple-On Connector