SLRO Sliding Sleeve

The Evolution Model SLRO Sliding Sleeve is a high pressure down hole device, normally screwed into the production tubing, that allows communication between the tubing and the casing.
Description

SLRO Sliding Sleeve

SLRO Sliding Sleeve
Product Data Sheet

Sliding Sleeve Catalog

Sliding Sleeve Catalog

High Pressure - Shift Down to Open - Sliding Sleeve

SLRO Sliding Sleeve


Applications

 

  • Displacing kill or completion fluid
  • Allowing multiple zones to produce up one tubing string
  • Selective testing of individual zones
  • Selective stimulation of individual zones
  • Circulating to kill the well
  • Gas lifting the well
  • Landing a blanking plug in the profile in the upper sub to shut in the well, test the tubing, or test the sleeve itself
  • Circulating inhibitors or methanol

Features

 

  • Pin by pin thread configuration.
  • All sliding sleeves are H2S service ready.
  • O-ring and Vee seal sealing mechanism
  • Do not wrench on the outer housing.
  • High pressure applications.









Otis® is a registered trademark of Halliburton Energy Services Inc.

The Evolution Model SLRO Sliding Sleeve is a high pressure down hole device, normally screwed into the production tubing, that allows communication between the tubing and the casing.

The device uses elastomeric Viton O-rings as well as replaceable upper and lower easy-to-replace Vee seals.  The Vee seals can be of various elastomer types.  The standard seal material is a carbon graphite/Teflon® composition.

The SLRO Sliding Sleeve has an Otis® R-style Selective Nipple profile and a sealing bore in the upper sub which serves as a receptacle for other Flow Control devices such as blanking plugs and separation tools.  The lower sub also contains a seal bore.

The SLRO Sliding Sleeve can be installed at any point in the tubing string.  More than one can be installed without any loss of function. When multiple sliding sleeves are in place, they can be selectively opened and closed in the tubing string.

The EB Shifting Tool is used to shift the SLRO Sliding Sleeve open and closed.  The tool is designed to that normal wireline activities will not open or close the sleeve inadvertently. Downward jarring opens the Inner Sleeve and upward jarring closes the Inner Sleeve.  It is available in tubing sizes from 1.900” up to 5 ½”, in 4140 L-80 material, as well as premium steels such as 9 Cr, 13 Cr and Incoloy 925. The standard thread is EUE, but various premium threads may be machined into this tool as required.

 


SLXA Sliding Sleeve

 

 

Tags -sliding sleeve, Flow Control, SLRO, EOT, Evolution Oil Tools, Otis R, high pressure

 

 

Fill out my online form.