By-Pass Blanking Plugs

Plugs run in the by-pass position, assuring equalization
Description

By-Pass Blanking Plugs

By-Pass Blanking Plugs
Technical Data Sheet

Plugs run in the by-pass position, assuring equalization

 

Applications

 

  • Shutting in wells downhole
  • Snubbing tubing in and out of the hole
  • Setting hydraulic packers
  • Test tubing by bleeding pressure off from above


 

Features

 

  • Run in the by-pass position, assuring pressure equalization
  • To equalize pressure, the prong must be pulled from the body
  • Normal wireline tools and techniques are used to run and pull
By-Pass Blanking Plugs

EFSG Blanking Plug

The Evolution Model EFSG Blanking Plug is a positive blank-off tool designed to be run into a Model EF Landing Nipple or into the upper sub of an EL Sliding Sleeve.  It holds pressure from both above and below. Conventional wireline tools and techniques are used to run, set and pull the plug.

EFWG Blanking Plug

The EFWG Blanking Plug is a positive blank-off, top no-go tool designed to be run into an EF Landing Nipple or an upper sub of an EL or SLFU Sliding Sleeve. It holds pressure from both above and below. Conventional wireline tools and techniques are used to run, set and pull the blanking plug.

The EFWG is designed to be used with a removable mandrel for equalizing pressure.

SLPX Blanking Plug

The Evolution Model SLPX Blanking Plug is used to land into the appropriate sized Model SLX Landing Nipple.

Once in place it blanks off all pressure from above or below the tool.  Some of the uses for the SLPX are: to pressure test tubing, to temporarily isolate specific zones the well, to temporarily or permanently suspend or abandon selected zones  and to help snub tubing into or out of the hole under pressure.

 

Tags - eot, evolution oil tools, oil tools, oil & gas, ES Lock Mandrel, ES-2 Lock Mandrel, flow control, By-Pass Blanking Plugs, blanking plugs, EFSG, EFWG, SLPX, FSG, FWG

 

 

Fill out my online form.