PDF E-mail

Artificial Lift Products


Artificial Lift Tools

Evolution Oil Tools has a complete selection of Artificial Lift Tools and accessories to meet your needs.



Torque Anchors

The major component of the Artificial Lift Tools products that we offer, is our range of Torque Anchors. All of our Torque Anchors provide you with a simple, economical and reliable solution to prevent tubing back off when PC pumping.

Depending on the conditions present, we can offer you with our Dynamic Torque Anchor (DTA), Centralizing Torque Anchor (CTA), Halbrite No-Turn Tool or with the simple and rugged Basic No-Turn Tool.


Tubing Rotators

Our Tubing Rotators complement our Torque Anchors in saving you from potential down time and rig expense, as well as reducing maintenance costs. The CTR Tubing Rotator was designed to extend the life of your tubing string by rotating the tubing. This assures that the sucker rods do not wear against only one spot fo the tubing, which will cause premature tubing failure. The E Style and E-Plus Tubing Rotators offer the same benefits of the CTR, but with a low profile design feature that helps to keep the overall wellhead height to a minimum.

Find out more about our line of Tubing Rotators.


Tubing Rotator QuestionnaireTubing Rotator Value Calculator


Gas Separators / Intakes

Evolution offers two unique Downhole Gas Separators to significantly increase pump efficiency and oil production.

Our PC Pump Gas Separator uses centrifugal forces to separate the gas from the produced liquids before they enter the pump. Liquids are carried through into the pump while the separated gas is forced to flow up the annulus.

The Evolution Oil Tools Beam Pump Gas Separator is designed to provide a method of allowing gas to migrate up the annulus, thereby preventing gas locking. The unique modular design makes it the most flexible Downhole Gas Separator available on the market.

We also offer a Bottom Feeder Weighted Eccentric Intake and a V-Backed Stainless Steel Pump Intake as well.


Tubing Drains

We also offer Tubing Drains at Evolution.  Tubing Drains provide a simple method for draining the tubing string before tripping out. The Tubing Drain Valve has a shear pinned sleeve and it is activated by inside tubing pressure.


Evolution Artificial Lift on LinkedIn Evolution Artificial Lift on Facebook


Fill out my online form.


  • E-Plus Tubing Rotator

    Evolution Oil Tools offers our E-Plus Tubing Rotator, which complies with API 6A bolting requirements, with 3 different Drive options: Manual, Mechanical & Electric (12V, 110V or 460V). Our Electric Drive Assembly includes our proprietary Gear Reducing System.

    Read More