WR Retrieving Tool

Applications

• Retrieving WR Retrievable Bridge Plugs

Features

• Durable construction
• Can be used to retrieve WR Plug from Coiled tubing (with a Shear Sub)

Retrieving the Evolution WR Retrievable Bridge Plug requires the use of the WR Retrieving Tool.

Operation

The WR Retrieving Tool is made up to the tubing string and run in the well. Once at depth the retrieving tool can be used to circulate any sand or debris that may be sitting on top of the plug.

Circulate onto the plug and make sure the wellbore is clean before pulling the bridge plug.

With the wellbore clean simply lower the tubing onto the plug. Releasing of the shear screws in the equalizing sleeve often occurs at this time.

Allow time for any differential pressures to equalize. Hoist or pull back the tubing where a slight over-pull is normal the plug will then release.

It is suggested the operation be stopped for a period of time in order to allow the sealing elements to relax so the well is not swabbed in or rubber is not left in the well while retrieving.