Error
  • The chosen template couldnt find on the filesystem: Evolution Oil Tools

SLXO Sliding Sleeve

The Evolution Model SLXO Sliding Sleeve is a down hole device, normally screwed into the production tubing, that allows communication between the tubing and the casing.
Description

SLXO Sliding Sleeve

Applications

 

  • Displacing kill or completion fluid
  • Allowing multiple zones to produce up one tubing string
  • Selective testing of individual zones
  • Selective stimulation of individual zones
  • Circulating to kill the well
  • Gas lifting the well
  • Landing a blanking plug in the profile in the upper sub to shut in the well, test the tubing, or test the sleeve itself
  • Circulating inhibitors or methanol

Features

 

  • Box by pin thread configuration.
  • All sliding sleeves are H2S service ready.
  • O-ring and Vee seal sealing mechanism









Otis® is a registered trademark of Halliburton Energy Services Inc.

The Evolution Model SLXO Sliding Sleeve is a down hole device, normally screwed into the production tubing, that allows communication between the tubing and the casing.

The device uses Viton O-rings as well as replaceable upper and lower easy-to-replace Vee seals.  The Vee seals can be of various elastomer types.  The standard seal material is a carbon graphite/Teflon® composition.

The SLXO Sliding Sleeve has an Otis® X-style Selective Nipple profile and a seal bore in the upper sub which serves as a receptacle for other Flow Control devices such as blanking plugs and separation tools.  The lower sub also contains a seal bore.

The SLXO Sliding Sleeve can be installed at any point in the tubing string.  More than one can be installed without any loss of function. When multiple sliding sleeves are in place, they can be selectively opened and closed in the tubing string.

The EB Shifting Tool is used to shift the SLXO Sliding Sleeve open and closed.  The tool is designed so that normal wireline activities will not open or close the sleeve inadvertently. Downward jarring opens the Inner Sleeve and upward jarring closes the Inner Sleeve. It is available in tubing sizes from 1.900” up to 5 ½”, in 4140 L-80 material, as well as premium steels such as 9 Cr, 13 Cr and Incoloy 925. The standard thread is EUE, but various premium threads may be machined into this tool as required.

 


 

SLXO Sliding Sleeve

Specifications

Tubing Size Seal Bore Shifting Tool Temperature Range Standard Elastomers Nominal OD*
Inch/mmInch/mmInch/mm
1.90 48.3 1.50 38.0 EB Shifting Tool

-4°to 400° F

-20°to 204° C

 

Viton O-rings

&

Carbon/

Teflon® Vee seals

2.37 60.2
2 1/16 52.4 1.62 41.0 2.50 63.5
2 3/8 60.3 1.87 47.0 3.063 77.47
2 7/8 73.0 2.31 58.0 3.668 93.0
3 1/2 88.9 2.75 69.9 4.28 108.7
2.81 71.0 4.50 114.3
4 1/2 114.3 3.75 95.0 5.563 141.3
5 1/2 139.7 4.31 109.5 6.05 153.7
4.56 115.8 6.63 168.4

* OD may vary depending on thread or application.

Range of threads available.  Custom threads available upon request.

 

Tags - sliding sleeve, Flow Control, SLXD, SLXO, EOT, Evolution Oil Tools, xo sliding sleeve

 

Fill out my online form.